Model：HK-GDW-100
Constant temperature and humidity box (small model)
Constant temperature and humidity box to meet the technical standard: provide various industrial parts, main accessories, semi-finished products such as: electronic parts, auto parts, notebook computers, etc The reliability, temperature and humidity environment test shall be designed and manufactured according to the technical conditions of gb10586-89 damp heat test chamber, and shall conform to GB / t2423.1-93 test procedures for electrical and electronic products, low temperature test methods; GB / t2423.2-89 test procedures for electrical and electronic products, high temperature test methods; GB / t2423.3-89 test procedures for electrical and electronic products, constant damp heat test methods and GB / t2423.4-89 alternating damp heat test. It is applied to simulate environment test of communication electronics, electrical appliances, automobile, motorcycle parts and other product parts
可程式恒温恒湿箱技术参数：
|
型号 |
HK-GDW-100 |
HK-GDW-150 |
|||
|
工作室尺寸:mm(W*H*D) |
400×500×400 |
400X500X500 |
500×600×750 |
||
|
外型尺寸 :mm(W*H*D) |
930×1650×960 |
930X1650X1030 |
1280×1950×1380 |
||
|
技术 |
温度范围 |
-20 ℃ (B 型)、 -40 ℃ （C 型）、 -60 ℃ （D 型）、 -70 ℃ （E 型）~ +130 ℃(+150 ℃ ) |
|||
|
温度均匀度 |
≤ 2 |
||||
|
温度波动度 |
± 0.5 ℃ |
||||
|
湿度范围： |
25%～98%R.H |
||||
|
湿度均匀度： |
±2%R·H |
||||
|
湿度波动度： |
±2%R·H |
||||
|
加 湿 器： |
浅槽式不锈钢加湿器，控制迅速且稳定，供给加湿水采用自动补水功能。 |
||||
|
升降温速率 |
0.7 ～ 1 ℃ /min (3 ℃ /min 、 5 ℃ /min 、 10 ℃ /min) |
||||
|
配置 |
保温材料 |
玻璃纤维棉 / 硬质聚胺脂发泡 |
|||
|
冷却器 |
多级膜片式蒸发器 |
||||
|
空气循环 |
单循环、加长轴、不锈钢离心风叶 |
||||
|
制冷方式 |
单元制冷方式 / 双元 ( 复叠 ) 制冷方式 |
||||
|
压缩机 |
法国“泰康”全封闭制冷压缩机 |
||||
|
控制 |
控制仪 |
进口韩国液晶触摸屏控制仪 |
|||
|
传感器 |
PT100 铂金电阻 |
||||
|
安保装置 |
漏电保护、缺水保护、超温保护、快速保险丝、压缩机过压保护 |
||||
|
标准配置 |
内热式中空玻璃观察窗： 250X300(mm) 一个 , 测试孔￠ 50mm 一个，样品架 2 付，照明灯一只 |
||||
|
电源 |
220V · 50Hz/380V · 50Hz |
||||
Features of constant temperature and humidity box:
Perfect modeling design: constant temperature and humidity box arc modeling and fog surface line processing, high texture appearance, and the use of planar non reaction handle, easy to operate, safe and reliable. The large rectangular observation window with bright and wide field of vision adopts fluorescent lamp to keep the light in the box, and uses the heat internal inlaid glass to keep clear observation of the condition in the test box at any time without the need of rain brush demisting.
Dehumidification system pipeline and control circuit separation: dehumidification system pipeline and power supply, controller, circuit board separation, can avoid pipeline water leakage and affect the circuit, improve safety.
The power wiring base and time signal base for test are both located in the lower part of the left side of the box (rated current 2a).
Simple and automatic water supply device: the water supply tank is located at the lower part in front of the test box, which is convenient for supplementary water supply (capacity is about 20L).